Sony LMD-A220 22″ LCD Production Monitor
- 21.5″ Diagonal Screen Size
- 1920 x 1080 Native Resolution
- Supports 1080/60p Video Signals
- 2x 3G/HD/SD-SDI Inputs
- SDI Inputs with Active Loop Through
- HDMI and Composite Inputs
- 178°/178° H/V Viewing Angle
- Waveform, Vectorscope, Focus Peaking
- Embedded Audio Decoding and Display
- 12V DC Input on 4-Pin XLR
Sony LMD-A220 Specs
|
| Type | IPS LCD |
| Backlight Technology | LED |
| Screen Size (Diagonal) | 21.5″ (54.6 cm) |
| Effective Picture Size (H x V) | 18.74 x 10.54″ (47.61 x 26.78 cm) |
| Resolution | 1920 x 1080 |
| Native Aspect Ratio | 16:9 |
| Viewing Angle (H/V) | 178° / 178° |
| Normal Scan | 0% scan |
| Color Temperature | D65, D93 |
| Warm-Up Time | Approx. 30 minutes |
|
| Video Input | 2 x BNC, 3G/HD/SD-SDI
1 x HDMI, HDCP compliant
1 x BNC, Composite (NTSC/PAL) |
| Audio Input | 1 x Stereo mini jack, -5 dBu 47 kohm or higher |
| Power Input | 1 x XLR 4-pin (male), 12 to 17 VDC (output impedance 0.05 ohm or less) |
| Remote Control | 1 x Parallel remote, RJ-45 modular connector 8-pin
1 x Serial remote, RJ-45 modular connector (ETHERNET, 10BASE-T/100BASE-TX) |
|
| Video Output | 2 x BNC, 3G/HD/SD-SDI, Output signal amplitude: 800 mVp-p ±10%
Output impedance: 75 ohm unbalanced1 x BNC, Composite (NTSC/PAL) loop-though, 75 ohm automatic terminal function |
| Audio Output | 1 x Stereo mini jack, audio monitor output
1 x Stereo mini jack, headphone output
1 x 1.0 W monaural speaker |
|
| Formats | 3G-SDI (10-bit 4:4:4 YCbCr and 4:4:4 RGB supported)
1080PsF 24/25/30
1080p 24/25/30/
1080i 50/60
720p 50/603G-SDI (10-bit 4:2:2 YCbCr supported)
1080p 50/60 HD/SD-SDI
1080PsF 24/25
1080p 24/25/30
1080i 50/60
720p 24/25/30/50/60
575/50i (PAL)
480/60i (NTSC) HDMI
1080p 24/25/30/50/60
1080i 50/60
720p 50/60
640×480/60p
576/50p
480/60p
575/50i (PAL)
480/60i (NTSC)
Note: 1080/25PsF, 30PsF are displayed as 1080/25PsF, 30PsF on the screen if the payload ID is added to the video signal, or displayed as 1080/50i, 60i if the ID is not added. |
| PC Signal Compatibility | HDMI input:
640 x 480: 25.175 MHz, fH 31.5 kHz, fV 60 Hz
1280 x 768: 68.25 MHz, fH 47.4 kHz, fV 60 Hz
1280 x 1024: 108 MHz, fH 64 kHz, fV 60 Hz
1360 x 768: 85.5 MHz, fH 47.7 kHz, fV 60 Hz
1440 x 900: 88.75 MHz, fH 55.5 kHz, fV 60 Hz
1680 x 1050: 119 MHz, fH 64.7 kHz, fV 60 Hz |
|
| Power | 100 to 240 VAC, 0.5 to 0.4 A, 50/60 Hz
12 to 17 VDC (4-pin XLR) |
| Power Consumption | Approx. 47 W (max.)
Approx. 43 W (average power consumption in the default status) |
| Inrush Current | Maximum possible inrush current at initial switch-on (voltage changes caused by manual switching):
45 a peak, 5 A r.m.s (240 VAC)
Inrush current after a mains interruption of 5 seconds (voltage changes caused at zero-crossing):
15 A peak, 3 A r.m.s. (240 VAC) |
| Operating Temperature | 32 to 95°F (0 to 35°C)
Recommended temperature: 68 to 86°F (20 to 30°C) |
| Operating Humidity | 30 to 85% (no condensation) |
| Storage Temperature | -4 to 140°F (-20 to 60°C) |
| Storage Humidity | 0 to 90% |
| Pressure Tolerance | 700 hPa to 1060 hPa |
| VESA Mounting | 100 x 100 mm |
| Dimensions (H x W x D) | Without feet: 13.3 x 20.4 x 2.6″ (338.0 x 517.8 x 67.2 mm)
With feet: 14.2 x 20.4 x 6.5″ (360.5 x 517.8 x 165.0 mm) |
| Weight | Approx. 11.9 lb (5.4 kg) |
|
| Package Weight | 18.0 lb |
| Box Dimensions (LxWxH) | 24.0 x 18.9 x 10.5″ |
There are no reviews yet.